Metal Repair Glue

Metal Repair Glue

Notice that crack in your metal workbench getting bigger every day? Taking it to a shop feels like a huge hassle, and you just want it fixed now. You relax knowing it's back to full strength. Handle broken tool handles, split radiator tanks, or busted trailer hitches right in your garage.

Squeeze out the same amount from each tube and mix them together until they blend smooth. Smear the mix onto the broken spot and push it into any cracks or holes. It gets firm in an hour, then turns rock hard after 24 hours.

When it's fully set, it holds up to 82 to 95 megapascals and works in temps from 40 below zero to 392 degrees. You can drill into it, cut threads, sand it down, polish it smooth, or slap paint on top. It sticks to steel, aluminum, cast iron, and pretty much any metal.

That's not all! It keeps out water, oil, mildew, rust, and handles hard knocks after it sets up. The fix holds tight on gas tanks, water pumps, kitchen appliances, and motors. Plus, you don't need torches, sparks, or fancy gear to use it.

• STRONGER THAN WELDING: Bonds metal surfaces with compressive strength up to 95 megapascals, creating repairs tougher than the original material itself.

• EXTREME TEMPERATURE RESISTANCE: Handles everything from 40 degrees below zero to 392 degrees Fahrenheit, protecting your repairs through harsh winters and blazing summers.

• FULLY WORKABLE SURFACE: Drill, tap threads, sand, polish, or paint directly over the cured repair just like you would with solid metal.

• SIMPLE 1:1 MIXING: Squeeze equal amounts from both tubes, blend them together, and apply with no guesswork or complicated measuring required.

• UNIVERSAL METAL BONDING: Sticks permanently to steel, aluminum, cast iron, and practically any metal surface you need to repair at home or work.

• COMPLETE ENVIRONMENTAL PROTECTION: Resists water, oil, mildew, corrosion, and heavy impacts once cured, keeping repairs sealed tight for years of use.

• FAST SETTING TIME: Gets firm enough to handle in just 60 minutes, then reaches full bonding strength after 24 hours of curing time.

• NO SPECIAL TOOLS NEEDED: Works without torches, welding equipment, sparks, or heat, making professional quality repairs accessible to anyone at home.

METAL REPAIR GLUE SPECS

• Initial Set Time: 60 minutes

• Full Cure Time: 24 hours

• Compressive Strength: 82 to 95 MPa

• Density: 99.8 to 115.4 lb/ft3

• Temperature Range: Negative 40°F to 392°F

• Mixing Ratio: 1:1

• Compatible Metals: Steel, aluminum, cast iron

• Resistance: Water, oil, mildew, corrosion

• Post Cure Work: Drilling, tapping, sanding, painting

PACKAGE INCLUDES:

• 1 x Metal Repair Glue